Home » Veris H8932 Network Display
Veris H8932 Network Display
CAD 
The Veris H8932 serves as the display tool for Modbus data. The Veris H8932 is compatible with the H704, H663, H8238, and Enercept® devices. It is available with no box for fast mounting to a panel.
Applications
- Allocating load-based costs
- Managing loads
- Overload protection
- Collecting energy data
- Tenant submetering
Easy to use
- Large 1" x 4" backlit LCD with adjustable brightness control for easy viewing
- Multi-color LED shows alarm status at a glance
- Pass-through communications to other Modbus® devices
- Easy keypad setup
- Monitor a variety of Veris power transducers from a single location
The Good:
The Bad:
The Bottom Line:
The Bad:
The Bottom Line:
Full Review
- AC Power Source Dedicated 120VAC, line-to-neutral. Fused. 200mA@250Vx20mm Fast-Blo
- AC Power Voltage Tolerance (90-132VAC) for 120V
- AC Power Frequency 50/60 Hz
- AC Power Termination 2-position Euro-style pluggable connector (max wire size 12 gauge)
- Alternate DC Power Source 12VDC, 300mA unfused (Auxiliary input disabled if line connected)
- Operating Temperature Range 0° to 50°C (32° to 122°F); <95%RH, non-condensing
- Storage Temperature Range -20°C to 70°C (-4° to 158°F)
Upstream Network Communications:
- Interface RS-485, RS-232
- Protocol Modbus RTU
- Baud Rate UI-selectable 2400, 4800, 9600, 19200
- Parity UI-selectable NONE, ODD, EVEN
- Communication Format 8-data-bits, 1-start-bit, 1-stop-bit
- RS-485 1/4-load transceivers; Duplex is UI-selectable 2-wire or 4-wire;5-position Euro-style pluggable connector
- RS-232 DCE, no handshaking
- DB-9 connection; pin 2: Transmitted Data from H8936; pin 3: Received Data into H8936; pin 5: Ground
Downstream Network Communications:
- Interface RS-485
- Protocol Modbus RTU
- Duplex UI-selectable 2-wire or 4-wire
- Load 1/4-load transceivers
- Baud Rate UI-selectable 2400, 4800, 9600, 19200
- Parity UI-selectable NONE, ODD, EVEN
- Communication Format 8-data-bits, 1-start-bit, 1-stop-bit
- Termination 5-position Euro-style pluggable connector UI-Switch Inputs Number/Function Four (METER, UP, DOWN, SELECT)
Auxiliary Input (Remote Alarm):
- Type Contact closure or pull-to-ground (10mA max)
- Isolation Optical to 2500VAC
- Sense UI-selectable N.O. or N.C.; (i.e. Closed = Alarm or Open = Alarm)
LCD:
- Size 1” x 4” visible area, 2 lines x16 characters per line
- Backlight Green, UI-adjustable brightness in 10 steps
Product brochures
No user reviews available.
